The Most Common Types of Laser Marking Machine

Laser marking machines use laser beams to mark permanent surfaces on a variety of different materials, engraving beautiful patterns, trademarks and words. The laser marking machines currently are used types on the market:

　　1, UV laser marking machine

　　The UV laser marking machine uses 355 nm UV laser. The 355 UV focused spot is extremely small, which can greatly reduce the mechanical deformation of the material. Mainly used in higher requirements for text, graphics and other products.


　　2, Fiber laser marking machine

　　The fiber laser marking machine uses a fiber laser. The fiber laser has the characteristics of small volume (air cooling,no waterless device), good beam quality  and maintenance-free.

　　Application: marking text, graphics, barcodes and other graphics on plastic, electronics, metal, ceramics, tobacco and other materials .


　　3, CO2 laser marking machine

　　CO2 laser marking machine is mainly used in non-metallic industries such as food, medicine, leather, tobacco, wood and electronics. The effect of marking is more delicate and beautiful than the silk screen printing and inkjet printing.


　　4, End pump laser marking machine

　　The end pump laser marking machine uses a solid-state laser pumped by a semiconductor laser as a pump source, from the end implant the laser crystal after fiber coupling. The pump beam enters the gain medium to overlap the cavity mode to the maximum extent, so that high power and high beam quality laser output.

　　The main application industry is also the same as the fiber laser marking machine, performance is also similar, but the peak power is higher.

　　5, green laser marking machine

　　Mainly used in the surface and internal marking of glass and crystal products, ceramics, metals, electronics, plastics and other products. It belongs to  cold light,which is also suitable for some products that have a relatively high heat response and high precision.

　　6, semiconductor laser marking machine

　　The main application industry is the same as the fiber laser marking machine, but market competition becomes more and more fierce, the advancement of fiber technology is getting faster and faster. Semiconductor laser marking machines have been slowly replaced by fiber laser marking machines on the market.

　　7, flying laser marking machine

　　Flying laser marking machine is a dynamic marking function equipment,mainly applied to the assembly line, which can greatly improving the production efficiency by automatically generating the serial number and batch number.

 Website:http://www.otlaser.com

 Email:info@otlaser.com
WhatsApp:008613352962391

评论

发表评论

此博客中的热门博文

OTLASER is the best china laser marking system supplier

　　OTLASER was recognized as China laser marking system  supplier ,OTLASER has 14 years of R&D experience, with a factory area of ​​nearly 3,000 square meters. The technical department has more than 100 senior staff members,367 patents;Now it has realized two core technologies: laser cutting system and laser marking system. 　　 　　Nowadays, OTLASER has a complete product line, including: fiber laser cutting machine series, co2 fiber laser series, uv laser series, 3d laser series and 10000W, 12000W, 15000W, high power laser cutting machine etc. The high power fiber laser cutting machine is one of the best laser manufacturers in China. These products have not only been recognized by China, but also exported to more than 30 countries and regions. 　　 　　OTLASER has fully automatic chip packaging and automated patch technology, and has realized the self-production of dozens of core optical components such as, pump source, QBH, collimator, combiner, isolator, acousto-optic modulator, et
阅读全文

3D laser cutting machine Specification

图片
The working mechanism of 3d laser cutting 　　 Laser cutting is the use of high power density laser beam scanning over the material surface, in a very short period of time to heat the material to thousands to tens of thousands of degrees Celsius, so that the material melting or gasification, and then high pressure gas will melt or gasification material blown away from the slit, to achieve the purpose of cutting materials. 　　The working mechanism of 3d laser cutting is relatively different from that of 2d laser cutting. 3d laser cutting requires constant adjustment of laser cutting head position to ensure that the laser cutting head is always perpendicular to the workpiece surface, so as to obtain excellent cutting quality. In actual production, 3d laser cutting program compilation requires the 3d modeling of parts, and then the introduction of 3d programming system generation path, and manual adjustment according to the characteristics of parts, tooling features, to avoid cutting head
阅读全文

The principle of laser cutting machine

图片
　　The principle of laser cutting machine 　　 　　 Laser cutting is to make the irradiated material melt, vaporize, ablate or reach the ignition point by irradiating the workpiece with the focused high power density laser beam, and at the same time remove the molten material by means of the high-speed airstream coaxial with the light beam, so as to realize the cutting of the workpiece. Laser cutting is one of the thermal cutting methods. The principle of laser cutting is shown below. 　　 Types of laser cutting 　　 　　Laser vaporization cutting is mainly used for cutting extremely thin metal materials and non-metal materials (such as paper, cloth, wood, plastics and rubber, etc.). 　　 　　1. Fusion cutting 　　 　　During laser fusion and cutting, metal materials are melted by means of laser heating, and non-oxidizing gases (Ar, He, N, etc.) are sprayed by the nozzle. Liquid metal is discharged by the strong pressure of the gas to form an incision. It only takes a tenth of the energy to
阅读全文